■By coating FLUOROSURF, surface of dry film of low friction properties with friction coefficient less than 0.1 is obtained.
■The coating film does not spread like a lubricant and does not pollute the outskirts.
■In comparison with conventional fluoride resin coating agent (water/oil repellent agent),
adhesiveness and film rigidity are higher and wear resistance has been improved.
■This thin and clear film does not impair the texture of the coated material.
■It works well as a binder of dry lubricant. (FG-5040)
■The non-flammable solvent type catches no fire and is safe to use. It does not attack the material.
|FG-5040||Usable as low friction, strong film (pencil hardness of 3H), anti-fouling,
acid-resistant, rust-preventive dry lubricant binder.
|FG-5080||Low friction (coefficient of dynamic friction 0.09), high adhesion,
high hardness (pencil hardness of 6-8H glass) clear thin film low-friction coat.
It’s possible to apply by wet coating or vapor deposition
|FG-5090||For metal parts, High adhesion and hardenss. An invisible ultra thin film produces low friction effects.|
Only representative FLUOROSURF products are presented here.
A diversity of products may be offered to meet any requirements. Please inquire of us about details .
Our products are chemical products for industrial use.
They may have an influence on the health depending on handling manner.
For this reason, our products or their samples are not offered for personal use.
We would like you to accept such our intention.